If you've ever wanted to be able to play without having a seizure, or in a different color than red, if you want to stream gameplay from real hardware, or if you've want to use a projector to show off your awesome skills at shows and expos, now you can!
 
Features:
Pixel-perfect scaling, crisp video output.
Select any of 8 palettes, red is default. Customization possible for a small fee.
Install on either left or right eye displays. Or both.
Choose yourself between low-lag or no-tearing options.
Can fit inside the unit itself.
Simple install, minimal wiring.
 
Does your Virtual Boy have bad motors or maybe a single(both) eye(s) that does not work at all? The Servo Kit allows you to remove the motors and mirrors to “consolize” your Virtual Boy.
Get the servo emulator here

Two Versions
VGA 800x600 at 60fps; upscaled x2 768x448
NTSC 240p at 60fps; No upscale, slightly squished horizontally
 
What you get:
The programmed and tested board
A ribbon cable
 
What's required:
Reasonable quality soldering iron and solder (leaded preferred)
A long 4.5mm "Game bit" screwdriver
About 3 meters of ~22AWG flexible wire
Whatever socket you want: DE-15 (VGA), 7 or 8 pin DIN, Mini DIN, etc.
A bit of patience and care
 
Virtual Tap is an Open Sourced Project:
https://github.com/furrtek/VirtualTap
 
Installation Instructions:
English version (V1)
Version Française (V1)